LED T10 Tube Housing PC Cover and Aluminum Base

1. Products Introduction

JE is a professional manufacturer of LED T10 tube housing in China. The shell of this JE-31 LED T10 tube housing PC cover and aluminum base is polycarbonate, the thickness of the diffuser cover can be between 0.6mm - 2.0mm, and there are many advantages:

1. High light transmittance: the transparency of the pure milky white cover can reach more than 85%, and the pure transparent cover can reach more than 95%.
2. High cold resistance: low temperature resistance -30 ℃, high temperature resistance 80-120 ℃.
3. Good flexibility: strong impact resistance, not easy to deform.
4. Perfect appearance: The product has high finish, no black spots, no stretch marks, no water waves, and the pass rate is over 95%.

And we use high-quality thickened aluminum profiles that have the following advantages:
1, very suitable for heat dissipation,
2, the surface is oxidized, the smoothness is high,
3, aluminum tube without black, no water marks.

2.Product Parameter (Specification)

Length	600mm, 900mm, 1200mm, 1500mm, 2400mm or customized
Tube	T10
Diameter	30mm
PCB board size	19*1.2mm
Driver	Internal
Max height of driver	13mm
Aluminum Base material	6063 aluminum alloy
Aluminum Base color	Silver
Plastic diffuser material	Polycarbonate
Plastic diffuser color	Frosted, Clear(transparent)
End caps	Plastic
Waterproof	IP20

3.Product Feature And Application

This JE-31 LED T10 tube housing PC cover and aluminum base is widely used in Factory, Supermarket, Corridor, School, Train station, parking lot and so on.

4. Product Details

More details of this JE-31 LED T10 tube housing PC cover and aluminum base:

5. Product Qualification

As a LED Aluminum Profile and LED plastic profile professional manufacturer, here are our main machines:
1.20 plastic extrusion machines
2.5 aluminum extrusion machines,
3.A professional integrating sphere to test whether the lamps made by our lamp kit can meet the various indicators required by customers,
4.A professional standard light source testing equipment for testing the light transmittance and other properties of plastic lampshades.
JE always focus on product qualification from aluminum and plastic raw material to extrusion production line, from samples quality control to mass production control, from strong perfect package to whole-heart service.

6. Deliver,Shipping And Serving

7.FAQ

Q1. Where is your factory located?
Re: We are located “World manufacturer” Dongguan city, Guangdong province, China.

Q2. Is the mold opening cost borne by the customer or your factory?
Re: Customer pay the cost first, after the quantity is more than 50000 meters for total order, the tool cost can be deducted in order.

Q3. How many days is the tool production of LED aluminum and plastic profile?
Re: Usually 7-15 days.

Q4. What is your normal processes for regular order?
Re: We are very suggest customer give the forecast for the next three month. This are our normal processes for regular order:
Receiving PO--Sales confirm PI with customer--Receiving 30% payment in advance--Sales assistant proceed production and confirm the exact LT--QC confirm the goods are ready for shipping--Receiving the balance payment--Arranging shipment--after sales service.

Q5. What is process of OEM order?
Re: Receiving drawing--Project manage confirm all production details with customer--Receiving tool production PO--Sales assistant proceed tool production--QC confirm samples are ready for shipping--Project manage confirm products with customer about every details-- start the regular order.