Design requirements for electrical parameters of LED tube housing

The electrical parameter design of the led lamp housing has the following requirements：

1. DC powered lamps controlled by external power supply: voltage and current measured by voltage and ammeter.

2. AC-powered lamps with built-in power supply control: use a digital power meter to measure the voltage, current, power, power factor and other parameters of the lamp.

3. Class I lamps must be tested for dielectric strength, leakage current, and insulation resistance. The dielectric strength is 1500V between the 220V terminal and the shell, and there is no flashover or breakdown within 1min. Leakage current≤1.0mA. Insulation resistance≥2MΩ.

The above are the design requirements of the electrical parameters for designing the housing of the LED lamp tube, I hope it will be helpful to you.

JE is a factory specializing in the production ofLED tube housings, for moretube housings, please refer to:

https://www.jeledprofile.com/led-tube-housing

For more details, please contact:sales@jeledprofile.com

Tel/Whatsapp/Wechat: 0086 13427851163