How to change traditional tubes to LED tubes

1. Remove the old fluorescent lamp tube

For the sake of safety, first turn off the main switch of the home circuit. Now there are two installation methods for the lamp tube. The first installation method is the old installation method, that is, there are springs on both sides, and push one side with a little force. It can come out at once, and it is the same when installing it. Align the two binding posts (also called wiring pins or pins) on one side of the lamp tube with the two holes of the socket on one side, and press firmly to one side, and the lamp tube will be released. Put it on.

2. Remove the bracket cover

There are two types of bracket covers commonly used, one is that the cover directly presses the bottom plate, for this kind of cover we can press the bottom plate with the left hand, hold the cover with the right hand and pull it up to remove the cover, and there is another The cover is locked on the bottom plate with screws, which can be removed by unscrewing the screws directly with a screwdriver

3. Remove the electronic ballast

The input terminal of the electronic ballast is connected to the power grid, and the output terminal of the electronic ballast is connected to the two ends of the fluorescent lamp tube. The electronic ballast can be easily removed by unscrewing the screw

The above is how to change the traditional lamp tube to LED tubes.

JE is a factory specializing in LED tube housing, for more details, please refer to:

www.jeledprofile.com

Or please contact: sales@jeledprofile.com

Tel/Whatsapp/Wechat: 0086 13427851163