LED linear light wiring installation method

The general voltage of LED linear lights is AC220V, DC12V and DC24V, so it is necessary to choose a suitable switching power supply. The size of the power supply is determined according to the power and connection length of the LED linear light. It should be noted that DC12V and DC24V should not be connected to AC220V, otherwise all lamp beads will be burned out. DC12V cannot be connected to DC24V control power; otherwise, the power will be more than doubled, and it is easy to burn out the lamp beads. The AC220V light strip can be directly connected to the mains. RGB seven-color LED linear light need to use a controller to achieve changing effects. Generally, 4 lines are used to distinguish black, red, green, and blue. The colorful light bar is generally a common anode, that is, there is a +12V connected to the black line on the top of the light bar, and the other is the negative pole, and the RGB is connected to the corresponding red, green and blue interface or power line. This is the method of LED linear light wiring installation.

JE is a factory specializing in LED linear lights housing, for more details, please refer to:

www.jeledprofile.com

Or please contact: sales@jeledprofile.com

Tel/Whatsapp/Wechat: 0086 13427851163