Maintenance tips for LED tubes

The biggest problem when LEDs are working is heat dissipation. If the heat dissipation of the LED tube housing is poor, they will soon fail. In daily use, check whether the heat dissipation surface is clean regularly. If the working environment is very clean, then the dust accumulation is the main concern. If there is too much, just clean it. Pay attention to safety when cleaning.

There are a few points to note when maintaining LED tubes:

1. Try not to switch on and off frequently when using tubes. Although the number of switching times of LED tubes is about 18 times that of ordinary fluorescent lamps, too frequent switching will still affect the life of the electronic components inside the LED lamp, thereby affecting the life of the lamp.

2. It is particularly important to note that, except for special LED tubes, ordinary LED tube housing should be avoided in humid environments. , humid environment will affect the electronic components of the LED tube drive power supply, electronic components will be damp, and the lamp life will be shortened.

3. Moisture-proof is the key to lighting maintenance, especially the LED lamps in the toilet and bathroom and the stove lights in the kitchen, which should be installed with moisture-proof lampshades to prevent moisture invasion, avoid rust damage or leakage short circuit.

4. It is best not to wash the LED tube housing with water, just wipe it with a dry cloth dipped in water. If it accidentally touches water, try to dry it. Do not wipe it with a wet cloth immediately after turning on the light.

JE is a factory specializing in the production of LED tube housings, for more tube housings, please refer to:

https://www.jeledprofile.com/led-tube-housing

For more details, please contact: sales@jeledprofile.com

Tel/Whatsapp/Wechat: 0086 13427851163