Effect of mold temperature on output of LED aluminum profiles

Mold temperature plays an important role in obtaining high output of LED aluminum profiles, generally not lower than 430°C; on the other hand, it should not be too high, otherwise, not only the hardness may decrease, but also oxidation will occur, mainly in the working zone. During the mold heating process, it should be avoided that the molds are close to each other, which hinders the air circulation. It is best to use a box-type heating furnace with grids, and each mold is placed in a separate box.

During the extrusion process, the temperature of the billet can rise up to about 40°C or higher, and the amount of rise is mainly determined by the mold design. In order to obtain the maximum output, the temperature must not be ignored, each temperature should be recorded and strictly controlled to find out the relationship between the maximum output of the machine and each temperature.

Finally, employees of LED aluminumprofileextrusion production plants should keep in mind that precise temperature control is crucial to increasing production.

JE has been producing and developing LEDaluminum profile since 2017. So far, it has 5 years of production experience. At the same time, it also supports the customization of PC profiles in various industries. Welcome new and old customers to customize with drawings and samples, manufacturers, Reasonably priced.

For moreLED aluminum profile, please refer to:

https://www.jeledprofile.com/led-aluminum-profiles

You can also contact:sales@jeledprofile.com

Tel/Whatsapp/Wechat: 0086 13427851163