Two of the influences of the extrusion machine on the output of LED aluminum profiles

During the extrusion process, the temperature of the LED aluminum profile extrusion barrel should be 15-40°C lower than the billet temperature. If the extrusion speed is too fast, so that the temperature of the extrusion cylinder rises above the temperature of the ingot, it is necessary to try to reduce the temperature of the extrusion cylinder. This is not only a troublesome task, but also the output of LED aluminum profiles will decrease. In the process of increasing the production speed, sometimes the heating element controlled by the galvanic couple will be cut off, but the temperature of the extrusion barrel is still rising. If the temperature of the extrusion barrel is higher than 470°C, the extrusion waste will rise. The ideal extrusion barrel temperature should be determined according to different alloys.

When producing high-grade and high-quality surface architectural LED aluminum profiles, the temperature of the extrusion pad should also be strictly controlled to reduce the amount of waste products with inconsistent surface tones. The quality of the fixed extrusion pad is much better than that of the movable one, which can accumulate more heat, thereby reducing the temperature of the end of the billet, reducing impurities entering the LED aluminum profile, and helping to increase production.

JE has been producing and developing LED aluminum profile since 2017. So far, it has 5 years of production experience. At the same time, it also supports the customization of PC profiles in various industries. Welcome new and old customers to customize with drawings and samples, manufacturers, Reasonably priced.

For more LED aluminum profile, please refer to:

https://www.jeledprofile.com/led-aluminum-profiles

You can also contact:sales@jeledprofile.com

Tel/Whatsapp/Wechat: 0086 13427851163