What are the tips for maintaining LED tubes

1. Do not wash the LED tube housing with water during normal cleaning. You can wipe it gently with a wet rag, but be sure to disconnect the power supply in advance. If water is accidentally splashed on it during cleaning, it must be wiped dry immediately before it can be powered on.

2. Moisture-proof is the most basic maintenance method, especially for bathroom and kitchen lamps. They must be equipped with moisture-proof LED tube housing to prevent water vapor from entering the lamp tube, causing rust and short circuit problems, and better protect the life and property safety of the owner.

3. If it is an ordinary LED tube, the delay switch cannot be used, otherwise it is easy to burn the lamp tube during use, causing a fire.

4. This type of LED tube cannot be placed in areas with severe humidity and high temperature. The ambient temperature must be between 5 and 40 degrees.

Summary: From the above article, we can see that whether the lamp can be directly connected to the power supply depends on the specific situation. If it is a finished LED tube, it can be directly connected to the power supply, while the LED tube beads must ensure that the corresponding DC power supply is reached. In order to ensure the safety of electricity use, we should also pay attention to maintenance when using LED tubes, so as to ensure its normal operation without any malfunction. I hope this can help everyone.

JE is a factory specializing in the production of LED tube housings, for more tube housings, please refer to:

https://www.jeledprofile.com/led-tube-housing

For more details, please contact: sales@jeledprofile.com

Tel/Whatsapp/Wechat: 0086 13427851163