> News > Industry News

Industry News

What to do if the sound is too loud during PC extrusion production

The automatic extruder is an important equipment for plastic molding and granulation.

Which one is better PS PMMA or PC diffuser

People often ask, which material is better for PC diffuser, PC, PS or PMMA, and the answer is definitely PC (polycarbonate). When producing PC diffuser, diffuser powder is added, and the processing technology used is extrusion, injection molding or blow molding.

The technical status and application status of PC light-diffusing plastics at home and abroad

Light-diffusing PC plastic, also known as polycarbonate light-diffusing plastic, is a transparent PC (polycarbonate) plastic based on a certain amount of light-diffusing agent and other additives, and polymerized through a special process. Light-diffusing material particles that are opaque to light.

Application of PC Light Diffusion Plastic in Diffusion Plate

At present, PC diffusers are mostly used in high-quality LED lighting products, and these products are mainly for export.

The principle and process of light PC diffuser

The principle of light PC diffuser: through chemical or physical means, using the physical imagination of refraction, reflection and scattering when light encounters two media with different refractive indices on the way, it is widely used in liquid crystal display, LED lighting and imaging display ......

Effect of mold temperature on output of LED aluminum profiles

Mold temperature plays an important role in obtaining high output of LED aluminum profiles, generally not lower than 430°C; on the other hand, it should not be too high, otherwise, not only the hardness may decrease, but also oxidation will occur, mainly in the working zone.

<...15 16 17 18 19...38 >