> News > Industry News

Industry News

The second extrusion molding condition -- section analysis and process conditions

The target profile belongs to the threading box type profile, which is mainly used in the scope of cable and wire protection pipelines. This section includes a single arm and a cavity, which is representative. Although the structure is relatively simple, there are generally high requirements for the......

One of the PC extrusion molding conditions -- material analysis

The mainstream ratio of PC/ABS materials in the market is that PC accounts for 60% to 70%, and ABS accounts for 30% to 40%.

Overall structure of PC/ABS extrusion

Molding is a process in which materials are processed through extruders and extrusion dies for heating, plasticizing, homogenizing, extruding, conveying, forming, and shaping to make them usable products.

Size of LED tube housing

The importance of light tubes has become self-evident in our daily life. Now T8/T5/T4 tubes are commonly used. In the past few years, T10/T12 tubes were commonly used. The most important difference between these tubes is the size. So what size do they represent?

Features of T12 waterproof tube

LED T12 waterproof tube, high brightness, high color rendering index, soft light, easy installation. The heat dissipation part is made of high thermal conductivity aluminum alloy material to ensure that the product can effectively dissipate heat, thereby ensuring the stability and long life of the ......

The third reason for the surface corrosion of aluminum extrusion profiles

Based on our many years of production experience and the inspection of various process parameters in the production of aluminum alloy profiles, as well as the follow-up investigation of the operator's execution of the process, the following are the three causes of corrosion spots.

<...23 24 25 26 27...38 >