> News > Industry News

Industry News

Why does the aluminum profile in the LED tube housing have corrosion spots?

According to JE's many years of production experience and the investigation of various process parameters in the production of aluminum profiles, as well as the follow-up investigation of the operator's implementation of the process, it is believed that the main reasons for the corrosion points of t......

Preventive measures for corrosion of aluminum profiles in LED tube housings

What are the preventive measures for the corrosion of the aluminum profile of the LED tube housing, and how should we properly adopt these preventive measures?

Corrosion phenomenon during surface treatment of aluminum profiles in LED tube housings

The aluminum ingots used in all aluminum profiles of our JE company are 6063 models. During the surface treatment of 6063 aluminum alloy profiles, it is sometimes found that there are different degrees of irregularly arranged dotted dark gray corrosion points on the surface of the aluminum profiles,......

New product release - T12 tube housing with PCB board width of 25.5mm

In order to meet more use fields of customers, our company has launched a new T12 all-plastic insert aluminumtube housing; its diameter isФ38MM, thehousing is extruded from new PC raw materials, and the bottom is porcelain white, which can make the inserted aluminum And the built-in electronic compo......

Solutions for substandard production of aluminum profiles in LED tube housings

Last time we talked about the reasons for the unqualified production of aluminum profiles in the lamp housing, so how to solve these problems?

Reasons for unqualified production of aluminum profiles in LED tube housings

When the extrusion temperature of the aluminum profile is too low, the extrusion speed is too slow, the outlet temperature of the profile at the extrusion machine cannot reach the solid solution temperature, and the solid solution strengthening effect cannot be achieved.

<...27 28 29 30 31...38 >